Understanding Your Fasco Motor: TL140-115-60-10Y TL .75 1500
The model number "Fasco TL140-115-60-10Y TL .75 1500" reveals a lot about this specific motor. Let's break down each component to understand its specifications and applications. This deep dive will help you understand what this motor is capable of and how it might fit your needs.
What does each part of the Fasco TL140-115-60-10Y TL .75 1500 model number mean?
This model number is a concise code conveying crucial motor characteristics. Let's decipher it:
-
TL140: This likely refers to a specific Fasco motor series or design. The "TL" might indicate a particular type of motor construction or application. The "140" likely signifies a size or internal designator. More precise information requires consulting Fasco's official documentation or contacting them directly.
-
115: This indicates the motor's voltage rating – 115 volts AC. This is a standard voltage in many parts of the world, commonly found in residential applications.
-
60: This refers to the frequency of the alternating current (AC) power supply, in Hertz (Hz). 60 Hz is common in North America and some other regions.
-
10Y: This likely denotes the motor's thermal protection class and possibly its capacitor type. This often indicates the motor's ability to handle overload and temperature fluctuations. Again, further specification is needed from the manufacturer.
-
TL: This might be a repeat of an earlier code segment or a different internal designation within the Fasco system.
-
.75: This is almost certainly the motor's horsepower (HP) rating – 0.75 horsepower. This is a relatively low-power motor, suitable for smaller appliances or equipment.
-
1500: This refers to the motor's speed, specifically 1500 revolutions per minute (RPM). This is a common speed for many small AC motors.
What type of applications is the Fasco TL140-115-60-10Y TL .75 1500 motor suitable for?
Given its relatively low horsepower and common voltage and frequency ratings, this Fasco motor is likely suitable for a range of small appliances and equipment, such as:
- Fans: Small ventilation fans, exhaust fans, or cooling fans.
- Small pumps: Water pumps, air pumps, or similar low-flow pumps.
- Light machinery: Small conveyors, mixing devices, or other low-torque applications.
- Household appliances: Some smaller household appliances might use a motor of this size and specification.
Where can I find a replacement or more information about the Fasco TL140-115-60-10Y TL .75 1500 motor?
To find a replacement or obtain more detailed specifications, you should:
- Contact Fasco directly: Their website should provide contact information, allowing you to reach out for technical assistance and parts.
- Search online retailers: Websites selling industrial motors and parts might carry this specific model or a suitable replacement. Ensure you check all specifications carefully before ordering.
- Check appliance manuals: If the motor is part of a larger appliance, the manual might list authorized service centers or replacement part sources.
Remember that motor selection requires precision. Improperly choosing a replacement motor could damage the appliance or pose a safety risk. Always confirm compatibility and consult the manufacturer when in doubt.
What are the common problems with Fasco motors?
While generally reliable, Fasco motors, like all motors, can experience issues. Common problems can include:
- Bearing wear: Over time, the bearings can wear down, leading to noise, vibration, and eventual motor failure.
- Winding damage: Overheating or electrical surges can damage the motor windings, causing the motor to fail.
- Capacitor failure: The capacitor, a crucial component in many AC motors, can fail, affecting motor starting and operation.
- Brush wear (if applicable): Some Fasco motors use brushes, which wear down over time and need replacing.
Addressing these issues typically requires professional servicing or replacement of the faulty component.
This information offers a solid understanding of the Fasco TL140-115-60-10Y TL .75 1500 motor. Remember to always consult the manufacturer's documentation for the most accurate and up-to-date information.
